Faber 3118 Nashville Insert Bridge Studs Gold Finish

Description

Faber Insert Nashville Bridge Studs - Gold Finish
With the Faber® iNsert™, you now have the option of replacing the tone robbing pot metal inserts in your Nashville bridge equipped guitar with the highest quality, tone enhancing German steel inserts on the market today. This system, with 4mm upper threaded posts, is reversible and requires no modification to your guitar, and will allow you to use either the Faber® ABR-1 style ABRN model bridge, or our revolutionary ABRL Tone-Lock™ bridge. Includes one pair of STEEL studs and machined brass thumbwheels (gloss or aged nickel, gloss or aged gold), a hard plastic installation tool, and a 5mm bolt to remove the old Nashville bridge inserts. NOTE: The depths of the original insert holes are not consistent! Please measure the depth and insure that the holes are deep enough so that the iNsert will install flush with the guitar body.
Features:
Material: Studs, Steel, plated; Thumbwheels, Brass, plated
Guitars using the Nashville bridge system
Easy installation!
Can be used with original Nashville bridge, Faber® ABRN, or Faber® Tone-Lock™ Bridge
Weight, with thumbwheels: .75 oz./21.3g
Overall length: 1.25” / 31.75mm
Length below flange: .55” / 14.0mm
Stud length, above flange: .59” / 15.0mm
Diameter, lower section: .276” / 7.0mm
Flange diameter: .375” / 9.5mm
Flange thickness: .061” / 1.55mm
Thumbwheels: Diameter: .63"/16mm, Thickness: .11"/2.8mm
Condition:
These are brand new, fresh from the factory. You’re purchasing from an authorized Faber dealer.
Terms:
International bidders are welcome, please use the shipping calculator for a shipping quote. Item will be professionally packed and shipped promptly once payment is received and funds are cleared. Please check my feedback and bid with confidence. Thanks for looking!